4-12 INCH A-2362 RWGV SLXFL

4-12 INCH A-2362 RWGV SLXFL

Catalog numbers:

  • A-2362-41 Slip-on end (with gasket) x flange end
  • A-2362-43 Slip-on end (less gasket) x flange end

Specifications:

  • Sizes – 4", 6", 8", 10", 12"
  • Meets or exceeds all applicable requirements of ANSI/AWWA C509, UL 262 Listed, FM 1120/1130 Approved, and certified to NSF/ANSI/CAN 61 and 372
  • Slip-on ends fit plain end of classes 150, 200 and 250 cast iron, ductile iron and classes 150 and 200 cast iron O.D. PVC
  • Flanged end drilling complies with ASME/ANSI B16.1 class 125 and B16.42 class 150
  • Iron body with nominal 10 mils Pro-Gard® Fusion Bonded Epoxy Coated interior and exterior surfaces
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
  • Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron; Non-rising stem (NRS)
  • Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
  • 2" square wrench nut (optional handwheel available) – open left or open right
  • 350 psig (2413 kPa/24 barg) maximum working pressure, 700psi (4,800 kPa/48 barg) static test pressure
  • UL Listed, FM Approved: 350 psig (2413 kPa/24 barg)
  • Designed for potable water applications

Options*:

  • Position indicators
  • Stainless steel stem: Type 304, Type 316
  • Low zinc, silicon bronze ASTM B98-C66100/H02 stem
  • Handwheel
  • EPDM Disc and O-rings

Resources:


Full Line Catalog