C-2362 Resilient Wedge Cut-In Valves

C-2362-44: D-150 mechanical joint ends with accessories and duck tipped rubber gaskets
C-2362-45: D-150 mechanical joint ends with accessories and plain tipped rubber gaskets
C-2362-54: D-150 mechanical joint ends with accessories and duck tipped rubber gaskets and bonding set screws in gland
C-2362-55: D-150 mechanical joint ends with accessories and plain tipped rubber gaskets and bonding set screws in gland

Sizes-- 4", 6", 8"
Meets or exceeds all applicable requirements of ANSI/AWWA C509 Standard and is certified to ANSI/NSF 61 & 372
Iron body with nominal 10 mils MUELLER^® Pro-Gard^® Fusion Bonded Epoxy Coated interior and exterior surfaces
Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
Non-rising stem (NRS)
Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
2" square wrench nut (optional handwheel available)--open left or open right
4" - 8" sizes--250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3450 kPa/35 barg) static test pressure
Designed for potable water applications.