4-48 INCH T-2361 SERIES TAPPING VALVE

T-2361-16 mechanical joint x flanged ends (with mechanical joint unassembled accessories)
T-2361-19 mechanical joint x flanged ends (less mechanical joint accessories)

Size-- 14", 16"††, 18", 20", 24", 30", 36", 42", 48"
Certified to ANSI/NSF 61 & 372 standard
Inlet flange complies with ASME/ANSI B16.1 Class 125 drilling and with MSS SP-60.
Mechanical joint end complies with ANSI/AWWA C111 Standard
Ductile iron body with nominal 10 mils Pro-Gard^TM Fusion Bonded Epoxy Coated interior and exterior surfaces; 42" thru 48" valves coated with HP epoxy.
Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
Ductile iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron.
Non-rising stem (NRS)
Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
2" square wrench nut – open left or open right 36"-48" require a Spur Gear or Beval Gear
250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3400 kPa/34 barg) static test pressure
14" and 16" UL Listed/FM Approved: 250 psig (1725 kPa/17 barg)
18", 20" and 24" sizes – UL Listed 175 psig (1200 kPa/12 barg); FM Approved 250 psig (1725 kPa/17 barg)
Designed for potable water applications.

Low zinc, silicon bronce ASTM B98-C66100/H02 stem; 14"-16" and ASTM B763-C99500; 18"-48"
Position indicators
Spur or Bevel Geared actuator
Stainless steel stem: Type 304, Type 316
Bypass 18"- 48" (2" on 18"-20"; 2.5 on 24"; 3" on 30"-48") and ASTM B763-C99500; 18"-36"
Bypass 3" on 30"-36"; 4" on 42"-48"
EPDM disc and O-rings (14"-16" option, 18"-48" standard)