C-2362
C-2362
Catalog numbers:
- D-150 mechanical joint ends with accessories and duck tipped rubber gaskets†
- D-150 mechanical joint ends with accessories and plain tipped rubber gaskets†
- D-150 mechanical joint ends with accessories and duck tipped rubber gaskets† and bonding set screws in gland
- D-150 mechanical joint ends with accessories and plain tipped rubber gaskets† and bonding set screws in gland
Specifications:
- Sizes-- 4", 6", 8"
- Meets or exceeds all applicable requirements of ANSI/AWWA C509 Standard and is certified to ANSI/NSF 61 & 372
- Iron body with nominal 10 mils MUELLER® Pro-Gard™ Fusion Bonded Epoxy Coated interior and exterior surfaces
- Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
- Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
- Non-rising stem (NRS)
- Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
- 2" square wrench nut (optional handwheel available)--open left or open right
- 4" - 8" sizes--250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3450 kPa/35 barg) static test pressure
- Designed for potable water applications.
Options:
- Position indicators
- Stainless steel stem: type 304 and type 316
- Low zinc, silicon bronze ASTM B98-C66100/H02 stem
- Handwheel
- EPDM disc and O-rings
Resources: