14-16 INCH A-2361 RWGV SLXSL

Sizes – 14", 16"
Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372
Slip-on ends fit plain end of classes 50 and 100 cast iron; ductile iron and AWWA C905 cast iron O.D. PVC
Ductile iron body with nominal 10 mils Pro-Gard^® Fusion Bonded Epoxy Coating interior and exterior surfaces
Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
Ductile iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
Non-rising stem (NRS)
Triple O-ring seal (2 above the thrust collar and 1 below)
2" square wrench nut - open left or open right
250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3450 kPa/35 barg) static test pressure
UL Listed, FM Approved – 250 psig (1725 kPa/17 barg)
Designed for potable water application

†Design and dimensions of the joint are manufactured under license of U.S. Pipe and Foundry Company.