Mueller DN350/14"-DN600/24" R-2361

public://uploads/media/dn35014-dn60024_r-2361_w_bronze_stem.png

Mueller DN350/14"-DN600/24" R-2361

Features:

Outside Screw & Yoke (OS&Y).
14” – 24”/DN350 –DN600*.
Mueller Pro-Gard® Fusion Bonded Epoxy Coating inside and out covers all cast surfaces (10 mil / 250μ nominal). Meets requirements of AWWA/ANSI C550.
Meets requirements of AWWA/ANSI C515 and is certified to ANSI/NSF 61 & 372.
Ductile Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron.
Polymer guide cap bearings on wedge guides resist wear and provide easy operation.
Bi-directional flow.
10-year limited warranty.
14” & 16”/DN350 & DN400: UL 262 Listed/ FM 1120/1130 Approved 250psig/17barg.
18” – 24”/DN450 – DN600: UL 262 Listed 175psig/12barg, FM Approved 250psig/17barg.
AWWA C-515 14” – 24”/DN350 – DN600: 250psig/17barg.
Flange End drilling meets: ANSI B16.1, Class 125 and ANSI B16.42, Class150 - Flat Face. 14” & 16”/DN350 & DN400 optional PN10, PN16 drilling.

*Resilient Wedge OS&Y Valves with similar performance and features, but different bonnet construction and bolting are available in 2”– 12”/DN50 – DN300 sizes, model R-2361.

Resources:

Datasheet