Mueller DN350/14"-DN600/24" R-2361 PLUS

Features:

• Outside Screw & Yoke (OS&Y), Standard-PLUS (+) Gate Valve.
• 14” – 24”/DN350 – DN600.*
• Fusion Bonded Epoxy Coating covers all cast surfaces inside and out – 10 mils (250μm) minimum. Meets requirements of AWWA/ANSI C550.
• Meets requirements of AWWA/ANSI C515 and is certified to ANSI/NSF 61 & 372.
• Ductile Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron.
• Polymer guide cap bearings on wedge guide.
• Everdur Bronze Stem.
• 316 Bolts, Nuts and Washers.
• 10-year limited warranty.
• 14” & 16”/DN350 & DN400: UL 262 Listed/FM 1120/1130 Approved 250psig/17barg.
• 18” – 24”/DN450 – DN600: UL 262 Listed 175psig/12barg, FM Approved 250psig/17barg.
• AWWA C-515 14” – 24”/DN350 – DN600: 250psig/17barg.
• Flange End drilling meets: ASME/ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face (14” & 16”/DN350 & DN400 optional PN10, PN16 drilling).
• Fitted with End Covers as standard.

Resources:

• Datasheet