Mueller DN50/2"-DN300/12" R-2361

Features:

• Outside Screw & Yoke (OS&Y).
• Iron Body, Bonnet, and Yoke.
• Mueller Pro-Gard® Fusion Bonded Epoxy Coating covers all cast surfaces inside and out – 10 mils (250 μ) nominal. Meets requirements of AWWA/ ANSI C550.
• Meets requirements of AWWA/ANSI C515 and is certified to ANSI / NSF 61 & 372.
• Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron.
• Polymer cap bearings on wedge guides resist wear and provide easy operation.
• Bi-directional flow.
• 10-year limited warranty.
• 2" – 12"/ DN50 – DN300: 350 psig / 24 barg AWWA/UL /FM WP, 700 psig / 48 barg TP.
• UL 262 listed, FM 1120 / 1130 approved.
• Flange End drilling meets: ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face. Optional PN10, PN16 drilling.

Resources:

• Datasheet