Mueller DN100/4"-DN300/12" P-2361 PLUS

Features:

• Post Indicator Valve (PIV), StandardPLUS (+) Gate Valve.
• Ductile Iron Body, Bonnet and Post Indicator Flange.
• Mueller Pro-Gard® 2-Pass Fusion Bonded Epoxy Coating covers all cast surfaces inside and out – 10 mils (250μm) minimum.
• Meets requirements of AWWA / ANSI C550.
• Meets requirements of AWWA/ANSI C515 and is certified to ANSI / NSF 61 & 372.
• Ductile Iron Wedge, symmetrical and fully encapsulated with molded EPDM rubber; no exposed iron.
• Polymer cap bearing on wedge guides.
• Everdur Bronze Stem.
• 316 Bolts, Nuts and Washers.
• Three stem O-rings seal in lubricant – two above thrust collar, one below.
• Polymer anti-friction washers – one above and one below thrust collar reduce operating torque.
• Bi-directional flow.
• 10-year limited warranty.
• Working Pressure: 350 psig / 24 barg; Test Pressure: 700 psig / 48 barg.
• UL 262 listed, FM 1120 / 1130 approved.
• Flange End drilling meets: ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face. Mechanical Joint also available.
• Fitted with End Covers as standard.

Resources:

• Datasheet