Mueller DN100/4"-DN300/12" P-2362

Non-Rising Stem (NRS), Post Indicator Valve (PIV).
Ductile Iron Body, Bonnet and Post Indicator Flange.
Mueller Pro-Gard® Fusion Bonded Epoxy Coating inside and out cover all cast surfaces – 10 mils (250 μm) nominal.
Meets requirements of AWWA/ ANSI C550.
Meets requirements of AWWA/ ANSI C509 and is certified to ANSI / NSF 61 & 372.
Ductile Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron.
Polymer cap bearing on wedge guides resist wear and provide easy operation.
Three stem O-rings seal in lubricant – two above thrust collar, one below.
Polymer anti-friction washers – one above and one below thrust collar reduce operating torque.
316 Bolts, Nuts and Washers.
Bi-directional flow.
10-year limited warranty.
Working Pressure: 350 psig / 24 barg; Test Pressure: 700 psig / 48 barg.
UL 262 listed; FM 1120 / 1130 approved.
Flange End drilling meets: ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face.
Optional PN10, PN16 drilling.
Mechanical Joint also available.