Mueller DN350/14"-DN600/24" P-2361

Features:

• Non-Rising Stem (NRS), Post Indicator Valve (PIV).
• Ductile Iron Body, Bonnet, and Post Indicator Flange.
• Mueller Pro-Gard® Fusion Bonded Epoxy Coating inside and out cover all cast surfaces – 10 mils (250μm) nominal.
• Meets requirements of AWWA/ANSI C550.
• Meets requirements of AWWA/ANSI C515 and is certified to ANSI/NSF 61 & 372.
• Ductile Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron.
• Polymer cap bearing on wedge guides resist wear and provide easy operation. 
• Three stem O-rings seal in lubricant – two above thrust collar, one below.
• Polymer anti-friction washers – one above and one below thrust collar reduces operating torque.
• 316 Bolts, Nuts and Washers.
• Bi-directional flow.
• 10-year limited warranty.
• Pressure rating: 14” & 16”/DN350 & DN400 AWWA/UL/FM rating 250psig/17barg; 18” – 24”/DN450 – DN600 AWWA rating 250psig/17barg, UL rating 175psig/12barg, FM Approved rating 250psig/17barg.
• Flange End drilling meets: ANSI B16.1 Class 125 Flat Face and ANSI B16.42 Class 150 Flat Face. 14” & 16”/DN350 & DN400 optional PN10, PN16 drilling.
• Mechanical Joint also available.

Resources:

• Datasheet