Mueller DN100/4"-DN300/12" P-2362

FEATURES:

• Non-Rising Stem (NRS), Post Indicator Valve (PIV).
• Ductile Iron Body, Bonnet and Post Indicator Flange.
• Mueller Pro-Gard® Fusion Bonded Epoxy Coating inside and out cover all cast surfaces – 10 mils (250 μm) nominal.
• Meets requirements of AWWA/ ANSI C550.
• Meets requirements of AWWA/ ANSI C509 and is certified to ANSI / NSF 61 & 372.
• Ductile Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron.
• Polymer cap bearing on wedge guides resist wear and provide easy operation.
• Three stem O-rings seal in lubricant – two above thrust collar, one below.
• Polymer anti-friction washers – one above and one below thrust collar reduce operating torque.
• 316 Bolts, Nuts and Washers.
• Bi-directional flow.
• 10-year limited warranty.
• Working Pressure: 350 psig / 24 barg; Test Pressure: 700 psig / 48 barg.
• UL 262 listed; FM 1120 / 1130 approved.
• Flange End drilling meets: ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face.
• Optional PN10, PN16 drilling.
• Mechanical Joint also available.

Resources:

• Datasheet