- Home
- Fire Protection
- UL/FM Post Indicator Valves
- USPVH DN350/14"-DN600/24" P-USP1 PLUS
USPVH DN350/14"-DN600/24" P-USP1 PLUS
USPVH DN350/14"-DN600/24" P-USP1 PLUS
FEATURES:
- Post Indicator Valve (PIV), StandardPLUS (+) Gate Valve.
- Ductile Iron Body and Bonnet, Ductile Iron Post Indicator Flange.
- Mueller Pro-Gard® 2-Pass Fusion Bonded Epoxy Coating covers all cast surfaces inside and out – 10 mils (250μm) minimum. Meets requirements of AWWA/ANSI C550.
- Meets requirements of AWWA/ANSI C515 and is certified to ANSI/NSF 61 & 372.
- Ductile Iron Wedge, symmetrical and fully encapsulated with molded EPDM rubber; no exposed iron.
- Polymer cap bearing on wedge guides.
- Everdur Bronze Stem.
- 316 Bolts, Nuts and Washers.
- Three stem O-rings seal in lubricant – two above thrust collar, one below.
- Polymer anti-friction washers – one above and one below thrust collar reduce operating torque. 10-year limited warranty.
- Pressure rating: 14” & 16”/DN350 & DN400 AWWA/UL/FM rating 250psig/17barg; 18” – 24”/DN450 – DN600 AWWA rating 250psig/17barg, UL rating 175psig/12barg, FM Approved rating 250psig/17barg.
- Flange End drilling meets: ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face. Optional PN10, PN16 drilling. Mechanical Joint also available.
- Fitted with End Covers as standard.
Resources: