MUELLER DN50/2" - DN300/12" R-MFP2 GROOVE X GROOVE/FLANGE X GROOVE ENDS

MUELLER DN50/2" - DN300/12" R-MFP2 GROOVE X GROOVE/FLANGE X GROOVE ENDS

Features:

  • Outside Screw & Yoke (OS&Y).
  • Iron Body, Bonnet, and Yoke.
  • Mueller Pro-Gard® Fusion Bonded Epoxy Coating covers all cast surfaces inside and out – 10 mils (250 μ) nominal.  Meets requirements of AWWA/ANSI C550.
  • Iron wedge, symmetrical and fully encapsulated with moulded rubber; no exposed iron.
  • Polymer cap bearings on wedge guides resist wear and provide easy operation.
  • Bi-directional flow.
  • 10-year limited warranty.
  • 2" – 12"/ DN50 – DN300: 300psig / 21barg UL / FM WP, 600psig / 41barg TP.
  • UL 262 listed, FM 1120 / 1130 approved. Flange End drilling meets: ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face.

Options:

  • PN10 / PN16 drilling (Flange X Groove End Valves ONLY).

Resources: