USPVH DN50/2" - DN300/12" A-USP1

Non-Rising Stem (NRS).
2" square Operating Nut (optional Handwheel).
All Ductile Iron Body and Bonnet.
Mueller Pro-Gard® Fusion Bonded Epoxy Coating – 10 mil (250μ) nominal. Meets requirements of AWWA/ANSI C550.
Meets requirements of AWWA/ANSI C515 and is certified to ANSI/NSF 61 & 372.
Antifriction washer above and below thrust collar.
316 Stainless Steel, Bonnet and Stuffing Box Bolts and Nuts.
Ductile Iron Wedge, symmetrical and fully encapsulated with moulded rubber; no exposed iron – Acetal Caps on guides ease operation and avoid wear.
10-year limited warranty.
Working Pressure: 350psig/24barg; Test Pressure: 700psig/48barg.
2"/DN50 – 12"/DN300, FM 1120/1130 Approved.
2½"/DN65 – 12"/DN300 UL 262 Listed, UL does not list 2" NRS valves.
Flange End drilling meets ANSI B16.1, Class 125 and ANSI B16.42, Class 150 Flat Face. Optional PN10, PN16 drilling. Mechanical Joint also available.