TRU-CUT^™

Part Number: 39431

Specifications: 

• For drilling operations under pressure on PVC pipe, 11/16" and 7/8" inclusive
• Hand operation
• Drive nut accepts both a standard ⅜" ratchet and a ¾" socket/box wrench
• Designed for use on pressurized or dry mains
• Used to drill through ¾" and 1" corporation stops and service saddles
• 7" (178 mm) boring bar travel
• Two retaining arms on feed sleeve connector retain the boring bar and help prevent line pressure from pushing the boring bar up once the cut is complete
• Used to cut PVC pipe only
• 200 psig (1379 kPa) maximum working pressure
• 150 F (66 C) maximum temperature rating