H-840 SERIES

Catalog numbers:

• H-840 cut-in sleeve with duck-tipped gasket*
• H-842 cut-in sleeve with duck-tipped gasket* and bonding set screws in gland
• H-841 cut-in sleeve with plain rubber gasket*
• H-843 cut-in sleeve with plain rubber gasket* and bonding set screws in gland

Specifications:

• Sizes: 4", 6", 8", 10", 12"
• Cast iron construction
• Spigot end corresponds to class 150 ductile iron pipe
• Sleeves are marked with dimensional information to show how much of existing main must be removed for installation of sleeve and valve.
• 200 psig (1375 kPa/14 barg) maximum working pressure

† See page 12.26 for extra gaskets and classes of pipe that cut-in valve will fit.

Resources: 

• Submittal Drawing: H-840/H-841 (5837)
• Submittal Drawing: H-842/H-843 (6223)