200 SERIES PIPE-SAVER® PIPE REPAIR CLAMPS
200 SERIES PIPE-SAVER® PIPE REPAIR CLAMPS
200 Series Pipe-Saver® Repair Clamps- 1/2" through 24" standard steel pipe
The catalog number for a 220 Style Clamp, 3" long for 1-1/2" steel pipe is 220-3-190.
The stainless steel 200 Series Pipe-Saver® Clamp comes in 3", 6", 9", 12", and 18" lengths, in single section to fit 1/2" - 8" standard steel pipe, and in two sections to fit 10" - 24" standard steel pipe. Cemented-in gaskets are available with a choice of smooth or gridded surfaces.
A clamp is also available with a separate cone gasket to close holes or deep pits. High carbon steel bolts with corrosion-resistant plating are standard; stainless steel bolts optional.
Features:
- Repair holes
- Repair splits
- Heavy bolt shoulders prevent turning in lug.
- Steel bolt has rolled, spin-fit threads to speed installation.
- Heavy, hex nut provides more thread contact for greater strength.
- Type 304Lstainless steel band
- Ductile iron lugs are shaped to provide uniform clamping pressureonpipe.
- Maximum water working pressure for properly installed clamps withnuts tightened to 500inch-pounds torque*: 1/2"-4" 350 psig (2400 kPa/24 barg); 6"-8"200psig (1375kPa/14 barg);10"-12"150psig; 14"-16"100psig (700kPa/7 barg),18" - 24"60psig (425kPa/4 barg).
200 Series Repair Clamp Submittal Drawing- 200Series_Submittal