3-12 INCH A-2361 RWGV Class 250 FLXFL
3-12 INCH A-2361 RWGV Class 250 FLXFL
Mueller® 3-12 INCH A-2361 RWGV Class 250 FLXFL
Catalog number: A-2361-12 Class 250 flanged ends
Specifications:
- Sizes – 3", 4", 6", 8", 10", 12"
- Meets or exceeds all applicable requirements of ANSI/AWWA C515*** Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to NSF/ANSI/CAN 61 and 372
- Flanged end drilling complies with ASME/ANSI B16.1 Class 250
- Iron body with nominal 10 mils Pro-Guard® Fusion Bonded Epoxy Coated interior and exterior surfaces
- Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
- Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
- Non-rising stem (NRS)
- Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
- 2" square wrench nut – open left or open right
- 350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (4800 kPa/48 barg) static test pressure
- UL Listed, FM Approved: 350 psig (2400 kPa/24 barg)
- Designed for potable water applications
Options:*
- Position Indicators
- Stainless steel stem: Type 304, Type 316
- Low zinc, silicon bronze ASTM B98-C66100/H02 stem
- 2" square wrench nut
- P/N 10/16 Drilling
- EPDM Disc and O-rings
Resources:
- Brochure - Mueller® Resilient Wedge Gate Valves (Form 12937)
- Operating Manual - 2300 Series Resilient Wedge Gate Valves (Form 12661)
- Installation Preparation Checklist (Form 11624)
- Parts Poster - A-2361 Resilient Wedge Gate Valve (Form 13003)
- Submittal Drawing (7457)
- Certificate of Compliance - 4"-12" A-2361 Resilient Wedge Gate Valves
- Suggested Specifications - 3"-12" A-2361 Reslient Wedge Gate Valves (Form 13813)
- Product Specifications - 3"-12" A-2361 Reslient Wedge Gate Valves (Form 12933)