2-12 INCH A-2362 RWGV MJXMJ

A-2362-20 Mechanical joint ends (with accessories unassembled)
A-2362-23 Mechanical joint ends (less accessories)
A-2362-25 Mechanical joint ends (with transition gaskets accessories unassembled)

Sizes: 2", 3", 4", 6", 8", 10", 12"
Meets or exceeds all applicable requirements of ANSI/AWWA C509 Standard, UL 262 listed, FM 1120/1130 approved, and certified to NSF/ANSI/CAN 61 and 372
Standard mechanical joint ends comply with ANSI/AWWA C111
Iron body with nominal 10 mils Pro-Gard^® Fusion Bonded Epoxy Coated interior and exterior surfaces
Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
Non-rising stem (NRS)
Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
2" square wrench nut - open left or open right
350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (4800 kPa/48 barg) static test pressure
UL Listed, FM Approved: 350 psig (2400 kPa/24 barg)
Designed for potable water applications