Stainless Steel lined body (suited for wet or dry dense and abrasive media) as well as Stainless Steel stem, gate, seat, and raised face.
Body cavity, seat configuration, and beveled gate designed provides shut-off capability in thick media such as pulp stock and slurries, or with solid media like pellets and powders.
Smooth flow non-clogging full port design.
Heavy-duty body design resists deflection from line loads and internal pressure.
Gate design withstands full 150psig/10barg pressure as required by MSS SP-81.
Valve seat face is protected by gate in both open and closed positions.
Enclosed Bronze stem bushing reduces operating torque and protects stem bushing in harsh environments.
Operators available: handwheel, chainwheel, bevel gear, hydraulic or pneumaticcylinder, fail safe spring cylinder, or electric motor.
Can manufacture in special materials such as Alloy 20, Hastelloy, Titanium, and Monel for severe services. Coatings can be added to protect blade.
Wiper available in packing to provide gate support and stabilize packing seal.
Flanges meet ANSI B16.5-150 standards with all tapped holes and serrated gasket faces, PN10 & PN16 drilling also available.
Hard-faced seat option available to prevent galling in high cycle and/or high end pressure or abrasive applications.
V-Port or O-Ring resilient seat options available to suit specific applications.
Standard TFE lubricated synthetic packing (TLSP) rated to 260° C and pH range of 3-11.
Custom designed sizes, pressures, and configurations available.
