14-16 INCH A-2361 RWGV SLXFL

• A-2361-41 Slip-on end (with gasket) x flange end
• A-2361-43 Slip-on end (less gasket) x flange end

Specifications:

• Sizes – 14”, 16”
• Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed, FM 1120/1130Approved, and certified to NSF/ANSI/CAN 61 and 372
• Slip-on ends fit plain end of classes 50 and 100 cast iron; ductile iron and AWWA C905
  cast iron O.D. PVC
• Flanged end drilling complies with ASME/ANSI B16.1 class 125 and B16.42 class 150
• Ductile iron body and bonnet with nominal 10 mils Mueller Pro-Gard® Fusion Bonded Epoxy
  Coated interior and exterior surfaces
• Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
• Ductile iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron
• Non-rising stem (NRS)
• Triple O-ring seal (2 above the thrust collar and 1 below)
• 2” square wrench nut - open left or open right
• 250 psig (1725 kPa/17 barg) maximum working pressure; 500 psig (3450 kPa/35 barg) static test pressure
• UL Listed, FM Approved – 250 psig (1725 kPa/17 barg) 
• Designed for potable water applications