14-54 INCH A-2361 RWGV FLXFL

Catalog number: A-2361-6

Flanged ends
Sizes – 14", 16", 18", 20", 24", 30", 36", 42", 48", 54"
Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard (thru 48”), UL 262 Listed (thru 24”), FM 1120/1130 Approved (thru 24”), and certified to NSF/ANSI/CAN 61 and 372
Flanged end dimensions and drilling complies with ASME/ANSI B16.1 Class 125
Ductile iron body and bonnet with nominal 10 mils Pro-Gard^® Fusion Bonded Epoxy coating interior and exterior surfaces; 42" – 54" valves coated with HP Epoxy coating.
Epoxy coatings meet or exceed all applicable requirements of ANSI/AWWA C550 Standard.
Ductile iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron.
Non-rising stem (NRS)
Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
2" square wrench nut (optional bevel or spur gearing) – open left or open right 30" - 54" require a Spur Gear or Bevel Gear
250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3400 kPa/34 barg) static test pressure
14" and 16" sizes – UL Listed, FM Approved: 250 psig (1725 kPa/17 barg)
18", 20" and 24" sizes – UL Listed/FM Approved: 175 psig (1200 kPa/12 barg); FM Approved 250 psig (1725 kPa/17 barg)
Designed for potable water applications

Stem Options:
- 14"-16" low zinc, silicon bronze ASTM B98-C66100/H02
- 18"-54" low zinc, silicon bronze ASTM B763-C99500 Stainless
- Stainless Steel Type 304, Type 316
Stainless steel fasteners: Type 316
Bypass 16"- 54" (2" on 16"-20"; 2.5" on 24"; 3" on 30"- 36", 4" on 42"-54")
Spur or bevel geared actuator
EPDM Disc and O-rings, 14"-16" optional, 18"-54" standard
Position indicators
Handwheel