2- 12 INCH A-2362 RESILIENT WEDGE GATE VALVES - M.J. X FL.
Catalog numbers:
A-2362-16 mechanical joint x flanged ends (with accessories unassembled)
A-2362-19 mechanical joint x flanged ends (less accessories)
Specifications:
Sizes – 2”, 3”, 4", 6", 8", 10", 12"
Meets or exceeds all applicable requirements of ANSI/AWWA C509 and C515, UL 262 Listed, FM 1120/1130 Approved, and certified to NSF/ANSI/CAN 61 and 372
Flanged end drilling complies with ASME/ANSI B16.1 class 125 and B16.42 class 150
Mechanical joint end complies with ANSI/AWWA C111 Standard
Iron body with nominal 10 mils Pro-Guard® Fusion Bonded Epoxy Coated interior and exterior surface
Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
Non-rising stem (NRS)
Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
2" square wrench nut – open left or open right
350psi (2400kps/24 barg) maximum working pressure; 700psi (4800kPa/48 barg) static test pressure
UL Listed, FM Approved: 350 psig (1725 kPa/17 barg)
