2-8 INCH A-2362 RWGV - RADXRAD
2-8 INCH A-2362 RWGV - RADXRAD
Catalog number: A-2362-37 radial compression ends
Specifications:
- Sizes – 2", 2-1/2", 3", 4", 6", 8"
- Meets or exceeds all applicable requirements of ANSI/AWWA C509 Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to NSF/ANSI/CAN 61 and 372
- Radial compression ends fit IPS PVC plastic pipe
- Ductile iron body with nominal 10 mills Pro-Guard® Fusion Bonded Epoxy coated interior and exterior surfaces
- Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
- Iron wedge, symmetrical and fully encapsulated with molded rubber, no exposed iron
- Non-rising stems (NRS)
- Triple O-ring seal (2 above the thrust collar and 1 below)
- 2" square wrench nut - open left or open right
- 350 psig (2400 kPA/24" barg) maximum working pressure; 700 psig (4800 kPal/48 barg) static test pressure
- UL listed, FM Approved: 350 psig (2400 kPa/24 barg)
- Designed for potable water applications
Options:
- Position indicators
- Low zinc, silicon bronze ASTM B98-C66100/H02 stem
- Handwheel
Resources:
- Operating Manual - 2300 Series Resilient Wedge Gate Valves (Form 12661)
- Installation Preparation Checklist (Form 11624)
- Suggested Specifications - 2"-12" A-2362 Reslient Wedge Gate Valves (Form 13814)
- Product Specifications - 2"-12" A-2362 Reslient Wedge Gate Valves (Form 13209)
- Drawing - 2-3 inch A-2362 - All End Types (7399)
- 4"-8" RWGV A2362-37 (7434)
- Certificate of Compliance - 2"-12" A-2362 Resilient Wedge Gate Valves
- Brochure