4-12 INCH A-2361 RWGV SLXFL

public://uploads/media/a-2361-slxfl-850px.png

4-12 INCH A-2361 RWGV SLXFL

Mueller® 350 psi Resilient Wedge A-2361 Gate Valves. Sizes 4"-12".

Catalog numbers:

A-2361-41 Slip-on† end (with gasket) x flange end
A-2361-43 Slip-on† end (less gasket) x flange end

Specifications:

Sizes – 4", 6", 8", 10", 12"
Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to NSF/ANSI/CAN 61 and 372.
Slip-on ends fit plain end of classes 150, 200 and 250 cast iron, ductile iron and classes 150 and 200 cast iron O.D. PVC
Flange end drilling complies with ASME/ANSI B16.1 Class 125
Iron body with nominal 10 mils Pro-Gard^® Fusion Bonded Epoxy Coated interior and exterior surfaces
Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
Non-rising stem (NRS)
Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
2" square wrench nut – open left or open right
350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (4800 kPa/48 barg) static test pressure
UL Listed, FM Approved: 350 psig (2400 kPa/24 barg)
Designed for potable water applications

†Design and dimensions of the joint are manufactured under license of U.S. Pipe and Foundry Company.
††Field Lok is a trademark of U.S. Pipe and Foundry Company, used with permission.

Options*:

Position indicators
Stainless steel stem: Type 304, Type 316
Low zinc, silicon bronze ASTM B98-C66100/H02 stem
Handwheel
EPDM Disc and O-rings

Resources:

Full Line Catalog