4-12 INCH A-2362 RWGV SLXFL FOR FIELD LOK GASKETS
4-12 INCH A-2362 RWGV SLXFL FOR FIELD LOK GASKETS
A-2362 Resilient Wedge Gate Valves. Sizes 4"-12".
Catalog Number:
- A-2362-62 Slip On (less Field Lok gasket) x flange end
Specifications:
- Sizes – 4”, 6”, 8”, 12”
- Meets or exceeds all applicable requirements of ANSI/AWWA C509, UL 262 Listed, FM 1120/1130 Approved, and certified to NSF/ANSI/CAN 61 and 372
- Slip-on ends with Field Lok gaskets are to be used on ductile iron pipe
- Flanged end drilling complies with ASME/ANSI B16.1 class 125 and B16.42 class 150
- Iron body with nominal 10 mils Mueller Pro-Gard® Fusion Bonded Epoxy Coated interior and exterior surfaces
- Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
- Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron
- Non-rising stem (NRS)
- Triple O-ring seal (2 above the thrust collar and 1 below)
- 2” square wrench nut – open left or open right
- 350psi (2400kps/24 barg maximum working pressure; 700psi (4800kPa/48 barg) static test pressure
- UL Listed, FM Approved: 350 psig (1725 kPa/17 barg)
- Designed for potable water applications
Options:
- Position indicators
- Stainless steel stem: Type 304, Type 316
- EPDM Disc and O-rings
- Low zinc, silicon bronze ASTM B98-C66100/H02 stem
- Handwheel
Resources:
- Operating Manual - 2300 Series Resilient Wedge Gate Valves (Form 12661)
- Installation Preparation Checklist (Form 11624)
- Drawing - 4-12 inch A-2362 - All End Types (7420)
- Certificate of Compliance - 2"-12" A-2362 Resilient Wedge Gate Valves
- Suggested Specifications - 2"-12" A-2362 Reslient Wedge Gate Valves
- Product Specifications - 2"-12" A-2362 Reslient Wedge Gate Valves
- Brochure