2-12 INCH T-2362 TAPPING VALVE MJXFL

T-2362-16 mechanical joint x flanged ends (with mechanical joint unassembled accessories)
T-2362-19 mechanical joint x flanged ends (less mechanical joint accessories)

Size-- 2", 3", 4", 6", 8", 10", 12"
Meets or exceeds all applicable requirements of ANSI/AWWA C509 Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372
Flanged end drilling complies with ASME/ANSI B16.1 class 125, B16.42 class 150 and with MSS SP-60
Mechanical joint outlet complies with ANSI/AWWA C111 Standard
Iron body with nominal 10 mils Pro-Gard^TM Fusion Bonded Epoxy Coated interior and exterior surfaces
Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron
Non-rising stem (NRS)
Triple O-ring seal (2 above the thrust collar and 1 below)
2" square wrench nut – open left or open right
250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3450 kPa/35 barg) static test pressure
UL Listed, FM Approved: 250 psig (1725 kPa/17 barg) maximum working pressure
Designed for potable water applications