2-12 INCH T-2362 TAPPING VALVE MJXFL

2-12 INCH T-2362 TAPPING VALVE MJXFL

Catalog numbers:

  • T-2362-16 mechanical joint x flanged ends (with mechanical joint unassembled accessories)
  • T-2362-19 mechanical joint x flanged ends (less mechanical joint accessories)

Specifications:

  • Size-- 2", 3", 4", 6", 8", 10", 12"
  • Meets or exceeds all applicable requirements of ANSI/AWWA C509 Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372
  • Flanged end drilling complies with ASME/ANSI B16.1 class 125, B16.42 class 150 and with MSS SP-60
  • Mechanical joint outlet complies with ANSI/AWWA C111 Standard
  • Iron body with nominal 10 mils Pro-GardTM Fusion Bonded Epoxy Coated interior and exterior surfaces
  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
  • Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron
  • Non-rising stem (NRS)
  • Triple O-ring seal (2 above the thrust collar and 1 below)
  • 2" square wrench nut – open left or open right 
  • 250 psig (1725 kPa/17 barg) maximum working pressure, 500 psig (3450 kPa/35 barg) static test pressure
  • UL Listed, FM Approved: 250 psig (1725 kPa/17 barg) maximum working pressure
  • Designed for potable water applications

Options:

  • Position indicators
  • Stainless steel stem: Type 304, Type 316
  • Low zinc, silicon bronze ASTM B98-C66100/H02 stem 
  • Handwheel
  • EPDM disc and O-rings

Resources:

Full Line Catalog