3-12 INCH A-2361 RWGV MJXFL

Catalog Numbers:

• A-2361-16 mechanical joint x flanged ends (with accessories unassembled)
• A-2361-19 mechanical joint x flanged ends (less accessories)

Specifications:

• Sizes – 3", 4", 6", 8", 10", 12"
• Meets or exceeds all applicable requirements of ANSI/AWWA C515*** Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to NSF/ANSI/CAN 61 and 372
• Flanged end drilling complies with ASME/ANSI B16.1 Class 125
• Mechanical joint end complies with ANSI/AWWA C111 Standard
• Iron body with nominal 10 mils Pro-Guard^® Fusion Bonded Epoxy Coated interior and exterior surfaces
• Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard.
• Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
• Non-rising stem (NRS)
• Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
• 2" square wrench nut--open left or open right
• 350 psig (2400 kPa/24 barg) maximum working pressure 700 psig (4800 kPa/48 barg) static test pressure
• UL Listed, FM Approved – 350 psig (2400 kPa/24 barg)
• Designed for potable water applications

Options*: