3-12 INCH A-2361 RWGV MJXMJ
3-12 INCH A-2361 RWGV MJXMJ
Mueller® 350 psi Resilient Wedge A-2361 Gate Valves. Sizes 3"-12".
Catalog numbers:
- A-2361-20 Mechanical joint ends (with accessories unassembled)
- A-2361-23 Mechanical joint ends (less accessories)
- A-2361-25 Mechanical joint ends (with transition gaskets accessories unassembled)
Specifications:
- Sizes – 3", 4", 6", 8", 10", 12"
- Non-rising stem (NRS)
- Meets or exceeds all applicable requirements of ANSI/AWWA C515*** Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to NSF/ANSI/CAN 61 and 372
- Standard mechanical joint ends comply with ANSI/AWWA C111
- Nominal 10 mils Pro-Gard® Fusion Bonded Epoxy coated interior and exterior surfaces
- Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard
- Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
- Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
- 2" square wrench nut–-open left or open right
- 350 psig (2400 kPa/24 barg) maximum working pressure, 700 psig (4800 kPa/48 barg) static test pressure
- UL Listed, FM Approved: 350 psig (2400 kPa/24 barg)
- Designed for potable water applications
Options*:
- Position indicators
- Stainless steel stem: Type 304, Type 316
- Low zinc, silicon bronze ASTM B98-C66100/H02 stem
- Handwheel
- EPDM Disc and O-rings
Resources:
- Brochure - Mueller® Resilient Wedge Gate Valves (Form 12937)
- Operating Manual - 2300 Series Resilient Wedge Gate Valves (Form 12661)
- Installation Preparation Checklist (Form 11624)
- Parts Poster - A-2361 Resilient Wedge Gate Valve (Form 13003)
- Drawing - 4-12 inch A-2361 - FLxFL, MJxMJ (7334)
- Submittal Drawing - 3in RWGV 2361 AWWA C515 - 350W - 700 Test UL/FM 350W - 700 Test (7435)
- Certificate of Compliance
- Suggested Specifications - 3"-12" A-2361 Resilient Wedge Gate Valves (Form 13813)
- Product Specifications - 3"-12" A-2361 Resilient Wedge Gate Valves (Form 12933)